Dispensing
20L Stainless Dispensing Can with Tap
F21-DX-20Erect stainless steel can with an integrated tap for controlled decanting of oils, fluids and workshop liquids.
Product code F21-HO-20
Pressed steel specified for lubricants and oils. For operations buying fluid in bulk and decanting it, not reselling sealed packs.
| Product code | F21-HO-20 |
|---|---|
| Capacity | 20 litres |
| Material | Pressed steel |
| Intended contents | Lubricants, oils and workshop fluids |
| Closure | Screw cap |
| Empty weight | ~3.9 kg (15.4 kg net per carton of 4) |
| External dimensions | 50.6 × 30.6 × 26 cm |
| Carton quantity | 4 per carton |
| Lead time | Approximately one month for a standard production run; samples in 7–15 days. Confirmed against your specification at quotation. |
| Steel thickness | 0.8 mm galvanized steel sheet |
| Carton dimensions | 65 × 52.5 × 56.2 cm, 15.4 kg net / 17 kg gross |
| Container loading | 584 × 20ft · 1,126 × 40ft · 1,335 × 40HQ |
These depend on your order, your market or the certificate that covers your run, so we quote them rather than publish one figure that would be wrong for most buyers. Ask and you get the number for your specification.
Before you order: Oils and lubricants vary widely in their compatibility requirements. Confirm your specific fluid with us before ordering.
Dimensions, material thickness, carton and container figures come from the current production specification. Empty weights are derived from the quoted net carton weight. Confirm against the drawing issued with your order.
Interior suited to lubricants rather than a general-purpose can pressed into oil service.
Buying fluid in bulk and decanting is materially cheaper than sealed retail packs at workshop volume.
Steel construction for an environment where containers get dropped, stacked and dragged.
Regular geometry that stores and palletises without wasted space.
The same breakdown our distributors put in front of their own buyers.
The body is pressed from cold-rolled steel to the pattern, seam-welded, then finished as set out in the specification above: internal coating, galvanising or powder coat according to what the can carries. Pressing runs across our Vietnam and China plants under one specification managed from Singapore, so the drawing and closure stay identical whichever plant fills the order.
Every can is checked before it leaves the plant:
Lubricants, oils and workshop fluids
Acids, alkalis, food and drinking water. The steel body is built for hydrocarbon fuels and oils, so water, food and aggressive chemicals need a different line.
Related guides: Steel vs HDPE fuel cansUN packaging codes explained
The regimes that apply to this type of container in each market we ship to, with the detail behind each one a click away. This is what the market asks for; what this particular design already holds is in the specification above.
Orientation for specification, not legal advice, and not a statement that this design holds a given approval. Requirements turn on the exact design, contents and destination, and they change. Tell us the market at enquiry and we confirm what applies to your specification, what we hold and what we would need to obtain.
It is a pressed steel container specified for lubricants, oils and workshop fluids. It suits workshops that decant bulk fluid rather than stock sealed retail packs.
The galvanized steel body is specified for oils and lubricants, which are hydrocarbons, not for acids or food-contact liquids. For potable water or food liquids we point you to the AISI 304 stainless line instead.
No, this tank closes with a screw cap and has no fitted tap. If you want to draw fluid through a tap, the 20L Stainless Dispensing Can with Tap in this category is built for that.
The body is 0.8 mm galvanized steel sheet, pressed and finished for oil service. The galvanising is why it is scoped for hydrocarbons rather than food or acids.
It measures 50.6 by 30.6 by 26 cm and weighs about 3.9 kg empty. Cans pack four to a carton at 15.4 kg net and 17 kg gross.
Oils and lubricants vary widely in what they ask of a container, so confirm your fluid with us before ordering. We will tell you whether this galvanized build is right for it.
Oils and lubricants that are not classified as dangerous goods do not need a UN-certified pack. Send us the fluid and we will confirm plainly whether any dangerous-goods documentation applies.
Yes, it is built to stand and be decanted from in a workshop, with a footprint that stacks and palletises for storage. Without a tap you pour or pump from the screw-cap opening rather than draw from a valve.
Yes. We can laser etch or emboss your branding and powder-coat the tank to a RAL colour. Tell us the finish you want on the quote.
Minimum order quantity and lead time are set on quotation, so share your volumes and market. Production runs in our Vietnam and China plants under Singapore management.
Erect stainless steel can with an integrated tap for controlled decanting of oils, fluids and workshop liquids.
Tell us your destination market, target volumes and whether you need private labelling.