Plastic pail
Round PP Bucket, 2.5L to 20L
Injection-moulded polypropylene pail in eighteen sizes from 2.5 to 20 litres, with tamper-evident lid, plastic or steel handle and in-mould labelling.
Filled, sealed, palletised, shipped
An open-head pail is filled on a line, closed once, palletised, and not opened again until it reaches the buyer. The seal and the pallet arithmetic decide whether it is the right pail. We publish both: the closure type per size, and the units per 20GP and 40HQ. Polypropylene where the contents allow it and the price matters; tinplate steel with a lever-lock ring or a flower lid where the contents are solvent-based, high-viscosity or dangerous goods.
Before you order: Pail wall thickness and closure type are set by the contents and the transport mode, not by the volume. Tell us what goes inside and how it ships and we will tell you which build applies.
Guides for buyers: Food-grade bucketsPails and tins: UN and food contactHDPE vs other plasticsPaint tins and cansUN specification packagingPackaging regulations by country
Injection-moulded polypropylene pail in eighteen sizes from 2.5 to 20 litres, with tamper-evident lid, plastic or steel handle and in-mould labelling.
Square and rectangular polypropylene pails from 3.7 to 32.44 litres. Flat faces for full-bleed labelling and a footprint that squares off on a pallet.
The 20L pail in the geometry each market expects, plus screw-lid, oil, oval and 30L fermentation formats.
20 litre detailing bucket with screw lid, grit filter, five-castor dolly and wash caddy. Sold as a system or as components.
Tinplate steel open-head pail in seventeen sizes from 4 to 35 litres, with a flower lid for a permanent seal or an iron hoop lever ring for reusable access.
Tight-head and open-head round tinplate buckets from 5 to 25 litres, with precision-rolled seams specified against permeation.
A manufacturer. We make pails and buckets at our production bases in Vietnam and China, to one specification managed from Singapore. You deal with the maker, so the drawing, the material and the finish stay the same from the first sample to every repeat order.
Yes. We supply distributors, wholesalers, retailers and own-brand buyers, export packed. The minimum order is quoted per model and customisation, and each product page lists the carton quantity and, where we have it, the container load.
Yes. The marking and colour options depend on the material: laser etching or embossing, RAL powder coat on steel, masterbatch colour in plastic. Own-brand minimums are quoted with the specification.
About one month for a standard production run, with samples in 7 to 15 days, confirmed against your specification at quotation.
The classic NATO-pattern pressed can. Three handles, stackable profile, and the geometry that fits the carriers, racks and holders already in the field.
Upright and horizontal steel fuel containers outside the NATO pattern, including tap-fitted tanks, agricultural formats and compact cans.
Containers specified for food and potable contact from the first drawing. Stainless where the can is kept and refilled, HDPE where it ships at volume.
Tap-fitted and upright dispensing cans for lubricants, oils and workshop fluids, where controlled decanting matters more than portability.
Low-profile horizontal cans in 5, 10 and 20 litre, galvanised or stainless. They slide under a boat seat, into a locker or onto a machine frame where a NATO upright has nowhere to go.
Stackable HDPE jerrycans and dedicated diesel exhaust fluid containers for decanting, distribution and automotive fluids.
Tinplate cans from 50 ml to 6 litres: round and square bodies, cone tops, and dauber and brush-in-cap cans for adhesives and solvent cements.
Caps, gaskets, vented and non-vented closures, child-resistant caps and flame arresters. The parts that fail first and cost least to replace.
Pouring spouts, taps, dispensing valves and the adapters that bring a drum or an IBC down to a can: the parts that move liquid from one container to the next.
Vehicle holders, brackets and retention for cans, and the ramps, cradles and dollies that move a 200 litre drum without anyone lifting it.
Spill decks, drum and IBC pallets, steel bunds, bench and drip trays, salvage drums and emergency eyewash: the containment that sits under the containers.
Tell us which product, your destination market and your volumes.