Accessory
Jerry Can Holders & Mounts
F21-AHSteel holders, brackets and strap systems tooled to our own can geometry, for vehicle, trailer and wall mounting.
Product code F21-DH-201 / -202 / -203
A drum standing upright is storage. A drum lying in a cradle with a tap in it is a dispensing point, and the cradle is what makes the difference safely.
| Product code | F21-DH-201 / -202 / -203 |
|---|---|
| Cradle versions | Single tall, single low, and double |
| Cradle load rating | 260 to 600 kg, by version |
| Dispensing base sump | 380 litres |
| Dispensing base load | 1,000 kg |
| Small container stacker load | 50 kg |
| Material | Moulded polyethylene |
| Stacking | Cradles stack for storage and for two-tier dispensing |
| Lead time | Approximately one month for a standard production run; samples in 7–15 days. Confirmed against your specification at quotation. |
These depend on your order, your market or the certificate that covers your run, so we quote them rather than publish one figure that would be wrong for most buyers. Ask and you get the number for your specification.
Before you order: A drum laid horizontally will vent, drip and eventually empty through any closure that is not sound. Fit a proper tap and a vent, and put containment under the cradle. A cradle on a bare floor moves the spill rather than preventing it.
Five cradles and stands. The load figure is the drum weight each is rated to carry, and a filled 200 litre drum is around 200 kilograms before you add the drum itself.
| Item photo | Model | Dimensions | Sump | Load | Weight |
|---|---|---|---|---|---|
| F21-DH-201 · Drum cradle, single tall | 97 × 80 × 52 cm | — | 260 kg | 20 kg |
| F21-DH-201 · Drum cradle, single low | 124.5 × 58.5 × 25 cm | — | 300 kg | 14.5 kg |
| F21-DH-201 · Drum cradle, double | 137.5 × 105 × 17.5 cm | — | 600 kg | 20 kg |
 | F21-DH-202 · Drum rack dispensing base | 143 × 135.5 × 63.5 cm | 380 L | 1,000 kg | 45 kg |
 | F21-DH-203 · Small container stacker | 63.5 × 53.5 × 40 cm | — | 50 kg | 5 kg |
Dimensions are length × width × height and weights are empty, both nominal. Load figures are the manufacturer’s published values; ask us for the test basis before you specify against them. The figure to check your containment rule against is the sump capacity, not the footprint.
A tap in a bung of an upright drum needs the drum tipped or a pump. Laid in a cradle, it gravity-feeds to the last few litres and nobody is lifting anything.
A drum being decanted drips, every time. The 380 litre sump under the rack base means the containment is part of the dispensing point rather than a separate purchase someone forgot.
Cradles stack, so two drums of different products sit at the same station on one footprint. That is how a workshop runs four lubricants without four floor positions.
A filled 200 litre drum of lubricant is around 180 kg before the drum. The single-drum cradles are rated at 260 and 300 kg, which leaves the margin that makes the figure usable.
The regimes that apply to this type of container in each market we ship to, with the detail behind each one a click away. This is what the market asks for; what this particular design already holds is in the specification above.
Orientation for specification, not legal advice, and not a statement that this design holds a given approval. Requirements turn on the exact design, contents and destination, and they change. Tell us the market at enquiry and we confirm what applies to your specification, what we hold and what we would need to obtain.
Because a tap in the bung of an upright drum needs the drum tipped or a pump. Laid in a cradle it gravity-feeds to the last few litres, and nobody is lifting anything to get at the contents.
Yes. A filled 200 litre drum of lubricant is around 180 kilograms before you count the drum. The single-drum cradles are rated at 260 and 300 kilograms and the double at 600, which leaves the margin that makes the figure usable.
They stack for storage and for two-tier dispensing, so two products sit at one station on one floor position. That is how a workshop runs four lubricants without four floor positions.
The drum rack dispensing base has a 380 litre sump built in. The cradles do not, so put a deck or a drip tray under them. A cradle on a bare floor moves the spill rather than preventing it.
Separately, from our pouring and transfer range. A drum laid horizontally will drip and eventually empty through any closure that is not sound, so the tap and the vent are part of the specification rather than an afterthought.
Quoted against your order. Tell us the drum size, the product and whether you need the containment underneath and we will quote the station rather than the cradle alone.
Steel holders, brackets and strap systems tooled to our own can geometry, for vehicle, trailer and wall mounting.
Strap, buckle and ratchet kits that hold a can in its holder over rough ground, sold to our own holder geometry.
Single-piece and two-piece polyethylene ramps for loading drums onto a spill pallet or tray, sized to pallet heights from 10 to 30 cm.
Poly drum dollies with integral sumps of 20 and 300 litres, a two-drum containment trolley, roll plastic pallets and a tilt truck.
Tell us your destination market, target volumes and whether you need private labelling.