Industrial
25L Stackable Plastic Jerrycan
F21-IP-25L-ring stackable HDPE jerrycan, 25 litres, natural. The industrial workhorse for decanting, storage and distribution.
Product code F21-IPA-05 / -10 / -20 / -25 / -30
Conductive HDPE for flammable liquids. Plain plastic holds a static charge; a conductive wall gives it somewhere to go.
| Product code | F21-IPA-05 / -10 / -20 / -25 / -30 |
|---|---|
| Capacities | 5, 10, 20, 25 and 30 litres |
| Material | Carbon-loaded conductive HDPE |
| Intended contents | Flammable liquids handled in classified areas |
| Form factor | Stackable, L-ring |
| Colour | Black (the carbon loading sets the colour) |
| Dangerous goods | Available UN 3H1 certified |
| Lead time | Approximately one month for a standard production run; samples in 7–15 days. Confirmed against your specification at quotation. |
These depend on your order, your market or the certificate that covers your run, so we quote them rather than publish one figure that would be wrong for most buyers. Ask and you get the number for your specification.
Before you order: Static control is a system, not a container. The can is one element alongside earthing, bonding and procedure. Confirm your area classification and handling method before specifying.
Decanting a flammable through an insulating plastic wall generates static. A conductive body and a bonded fill point remove the ignition source.
The carbon loading that makes it conductive is what makes it black. Anyone offering conductive HDPE in white is describing something else.
Specify whether you need a bonding lug for earthing during transfer, because it has to be moulded or fitted, not added later.
Identical geometry to the standard line, so mixed pallets behave predictably.
The same breakdown our distributors put in front of their own buyers.
The can is blow-moulded from high-density polyethylene in a single seamless wall, with the neck and handle formed in the same shot, so there is no seam to split under load. The wall is carbon-loaded so the can dissipates static rather than holding a charge, for flammable-liquid handling. Moulding runs across our Vietnam and China plants under one specification managed from Singapore.
UN 3H1 certification is earned through a defined test regimen, and the can is built and verified to it:
Certificate, test report and stamped UN marking are available for the exact design you order.
Flammable liquids handled in classified areas
Fuels unless the can is fluorinated, and any chemical you have not had confirmed.
Send us the exact liquid, its concentration and its temperature and we confirm it against a compatibility check before you order.
Related guides: Chemical compatibilityUN packaging codes explained
The regimes that apply to this type of container in each market we ship to, with the detail behind each one a click away. This is what the market asks for; what this particular design already holds is in the specification above.
Orientation for specification, not legal advice, and not a statement that this design holds a given approval. Requirements turn on the exact design, contents and destination, and they change. Tell us the market at enquiry and we confirm what applies to your specification, what we hold and what we would need to obtain.
A plain plastic wall is insulating and can build a static charge as liquid moves, which is the hazard with flammable liquids. The carbon loading makes the wall conductive so charge can be bonded away.
It is specified for flammable liquids handled in classified areas, but the exact chemical still governs compatibility. Send us the liquid, its concentration and temperature and we confirm it against a chemical-compatibility check.
HDPE resists many acids and solvents, though suitability depends on the specific substance, strength and temperature. Tell us what you are handling and we check it rather than give a blanket yes, and for heavy permeation you may need the fluorinated build as well.
No. This is a carbon-loaded conductive can for flammables, not a food-contact can. For food or beverage use, ask us about the Food-Grade HDPE line.
Conductive HDPE controls static, not permeation. If your flammable liquid also permeates plain HDPE, tell us and we discuss whether a fluorinated specification is needed alongside it.
No. The can is one part of a system that includes earthing, bonding and procedure, and it works through its bonding point. Confirm your area classification and handling method before specifying it.
It is available UN 3H1 certified, tied to the specific contents, packing group and fill weight. Confirm the packing group of your exact liquid with us and we tell you which certificate and design covers it.
The black is the carbon loading that makes the wall conductive, so it is a specification rather than a colour choice. In-line marking is still available for private-label programmes.
Clean HDPE can be reused, subject to a service life measured from its date of manufacture that matters for regulated reuse. Ask us for the manufacturing date and reuse guidance for your contents.
It comes in 5, 10, 20, 25 and 30 litre. Minimum order and lead time come on quotation, and the cans are moulded in Vietnam and China and managed from Singapore.
L-ring stackable HDPE jerrycan, 25 litres, natural. The industrial workhorse for decanting, storage and distribution.
Empty HDPE cans for diesel exhaust fluid, 10 and 20 litre, blue cap, with a misfueling-resistant spout. Packed by the carton.
Barrier-treated HDPE for solvents, agrochemicals and hydrocarbons. The fluorinated interior stops permeation and the panelling that follows it.
Natural HDPE for food, beverage and potable applications, with the wetted path specified for food contact rather than assumed.
The same stackable body without a dangerous-goods approval, for non-hazardous liquids. Faster to supply and materially cheaper.
Removable-head HDPE for pastes, powders, gels and viscous product that will not pour through a narrow neck.
Tell us your destination market, target volumes and whether you need private labelling.