Industrial
25L Stackable Plastic Jerrycan
F21-IP-25L-ring stackable HDPE jerrycan, 25 litres, natural. The industrial workhorse for decanting, storage and distribution.
Product code F21-IPE-05 / -10 / -20 / -25 / -30
The standard stackable body, supplied without UN certification. For detergents, cleaning chemicals and other non-hazardous liquids where the approval is cost you do not need.
| Product code | F21-IPE-05 / -10 / -20 / -25 / -30 |
|---|---|
| Capacities | 5, 10, 20, 25 and 30 litres |
| Material | HDPE |
| Intended contents | Non-hazardous liquids only |
| Form factor | Stackable, L-ring |
| Dangerous goods | Not UN certified — not for dangerous goods |
| Colour | Natural, blue, black or to your RAL reference |
| Lead time | Approximately one month for a standard production run; samples in 7–15 days. Confirmed against your specification at quotation. |
These depend on your order, your market or the certificate that covers your run, so we quote them rather than publish one figure that would be wrong for most buyers. Ask and you get the number for your specification.
Before you order: This line carries no dangerous-goods approval and must not be used for hazardous contents. If your product is classified for transport you need the UN-certified line instead.
A UN design-type approval is a destructive test programme held per site. If your product is not a dangerous good, you are paying for a certificate that does nothing for you.
No approval programme in front of it, so this is the quickest SKU in the range to get into a market.
Identical body and stacking geometry to the certified line, so it sits on the same pallet and the same rack.
Supplied without UN marking so nobody mistakes it for a certified can. That is deliberate.
The same breakdown our distributors put in front of their own buyers.
The can is blow-moulded from high-density polyethylene in a single seamless wall, with the neck and handle formed in the same shot, so there is no seam to split under load. Moulding runs across our Vietnam and China plants under one specification managed from Singapore.
UN 3H1 certification is earned through a defined test regimen, and the can is built and verified to it:
Certificate, test report and stamped UN marking are available for the exact design you order.
Non-hazardous liquids only
Fuels unless the can is fluorinated, and any chemical you have not had confirmed.
Send us the exact liquid, its concentration and its temperature and we confirm it against a compatibility check before you order.
Related guides: Chemical compatibilityUN packaging codes explained
The regimes that apply to this type of container in each market we ship to, with the detail behind each one a click away. This is what the market asks for; what this particular design already holds is in the specification above.
Orientation for specification, not legal advice, and not a statement that this design holds a given approval. Requirements turn on the exact design, contents and destination, and they change. Tell us the market at enquiry and we confirm what applies to your specification, what we hold and what we would need to obtain.
It is for non-hazardous liquids only and carries no dangerous-goods approval. If your product is classified for transport you need the UN-certified line instead, so send us the contents and we tell you which side you are on.
HDPE resists many acids and chemicals, but this line is for non-hazardous liquids and carries no UN rating. Tell us the exact substance and we confirm both its compatibility and whether it needs the certified can.
The economy line is a general non-hazardous can, not specified for food contact. For food or beverage use, ask us about the Food-Grade HDPE line, which is specified for that.
Plain HDPE can let some solvents and fuels permeate slowly, and those liquids are usually hazardous anyway, which this line is not for. For permeating or flammable liquids, look at the fluorinated or antistatic lines.
No. Flammable liquids are dangerous goods and this can has no UN approval and no static control. The antistatic UN-certified line is the correct specification for flammables.
The dangerous-goods approval is much of the cost and lead time, so removing it for non-hazardous liquids makes this the cheapest and fastest line to launch. It uses the same stackable body and shelf footprint as the certified cans.
None. It is not UN certified and must not be used for any dangerous goods or packing group. If your liquid carries a packing group, we move you to the certified line.
Clean HDPE can be reused for non-hazardous liquids, and it carries a service life from its date of manufacture. Ask us for the manufacturing date and reuse guidance for your application.
Yes. It comes in natural, blue, black or your RAL reference, and we can add in-line marking for a private-label programme. Sizes run 5, 10, 20, 25 and 30 litre.
Minimum order and lead time come on quotation. The cans are moulded in Vietnam and China and managed from Singapore, and HDPE is resin code 2 and recyclable when clean.
L-ring stackable HDPE jerrycan, 25 litres, natural. The industrial workhorse for decanting, storage and distribution.
Empty HDPE cans for diesel exhaust fluid, 10 and 20 litre, blue cap, with a misfueling-resistant spout. Packed by the carton.
Barrier-treated HDPE for solvents, agrochemicals and hydrocarbons. The fluorinated interior stops permeation and the panelling that follows it.
Carbon-loaded conductive HDPE for flammable liquids, where static build-up on an insulating wall is the hazard.
Natural HDPE for food, beverage and potable applications, with the wetted path specified for food contact rather than assumed.
Removable-head HDPE for pastes, powders, gels and viscous product that will not pour through a narrow neck.
Tell us your destination market, target volumes and whether you need private labelling.